HVI®power Conductor

High-voltage-resistant conductor for all classes of lightning protection systems (LPS)

Suitable for class of LPS I
The complete system including accessory is tested with lightning impulse currents (10/350 μs) of 200 kA. HVI power is capable of conducting the maximum current in a down conductor (200 kA).

Separation distance increased by 20%
HVI power allows to keep an equivalent separation distance of
90 centimetres in air and 180 centimetres in case of solid material. This means that the separation distance kept by HVI power is 20% higher than that of other high-voltage-resistant conductors (75 centimetres).

Extremely easy to use
The new spring in the supporting tube allows to automatically contact the semi-conductive coating of HVI power, thus establishing the sealing end. The functional equipotential bonding is directly connected to the metal supporting tube. This ensures fast and easy installation and minimises installation errors.

Optimised wind load
HVI power is installed in the stainless steel supporting tube. This has the following advantages:

  • Improved aesthetic appearance since the conductor is not visible
  • Small area exposed to wind
  • Faster installation

Easy configuration
The connection set allows to easily install HVI power.

Easy handling
The plastic insulation can be stripped by means of the HVI strip 27 tool without damaging the copper conductor.

Different models and their specifications

High-voltage-resistant, insulated down conductor for maintaining the separation distance to electrically conductive parts according to IEC/EN 62305-3.

HVI®power Conductor (pre-assembled, installation inside the tube)

HVI P RIV 90 27 L6M SW

819 160

With one head piece and one connection element (enclosed loose). Minimum order length 6 m, conductor length has to be stated when ordering (in steps of 0.5 m).

  • Technical specifications (819 160)
    HVI®power Conductor (pre-assembled, installation inside the tube)
    Type HVI P RIV 90 27 L6M SW
    Part No. 819 160
    Material of conductor Cu
    Material of insulation PE
    Material of sheath PE
    Color of conductor black ●
    RAL color similar to 9011
    Cross section of core 25 mm²
    Lightning current carrying capability (class / Iimp) H2 / 200 kA
    Equivalent separation distance s (in air) ≤ 90 cm
    Diameter Ø conductor 27 mm
    Characteristics of sheath UV stabilised and weather resistant
    Minimum order length 6 m
    Maximum order length 35 m
    Standard DIN IEC/TS 62561-8 (VDE V 0185-561-8)
    Weight 4,8 kg
    GTIN 4013364152298
    PU 1 pc(s)

Downloads for 819 160

HVI P RIV 90 27 L6M SW
HVI®power Conductor (pre-assembled, installation inside the tube)

HVI®power Conductor (pre-assembled, installation outside the tube) for HVI power supporting tube GRP / Al

HVI P RAV 90 27 L6M SW

819 165

HVI®power Conductor pre-assembled for installation outside the tube with one head piece and one connection element (enclosed loose). Connection kit for installing the HVI power Conductor on HVI power supporting tubes GRP / Al consists of threaded pins, a connection part, heat-shrinkable sleeve and fixing ring with slotted conductor holder (Ø27 mm) for the sealing end (including cable ties). Minimum order length 6 m, conductor length has to be stated when ordering (in steps of 0.5 m).

  • Technical specifications (819 165)
    HVI®power Conductor (pre-assembled, installation outside the tube) for HVI power supporting tube GRP / Al
    Type HVI P RAV 90 27 L6M SW
    Part No. 819 165
    Material of conductor Cu
    Material of insulation PE
    Material of sheath PE
    Color of conductor black ●
    RAL color similar to 9011
    Cross section of core 25 mm²
    Lightning current carrying capability (class / Iimp) H2 / 200 kA
    Equivalent separation distance s (in air) ≤ 90 cm
    Diameter Ø conductor 27 mm
    Characteristics of sheath UV stabilised and weather resistant
    Minimum order length 6 m
    Maximum order length 35 m
    Standard DIN IEC/TS 62561-8 (VDE V 0185-561-8)
    Weight 4,48 kg
    GTIN 4013364272224
    PU 1 pc(s)

Downloads for 819 165

HVI P RAV 90 27 L6M SW
HVI®power Conductor (pre-assembled, installation outside the tube) for HVI power supporting tube GRP / Al

HVI®power long Conductor (on a reel)

HVI P LO 90 27 L100M SW

Part No. 819 137

The HVI®power long Conductor for on-site assembly comes in a length of 100 m on a disposable plywood reel (diameter approx. 900 mm, width approx. 485 mm). Allen key included in delivery.

  • Technical specifications (819 137)
    HVI®power long Conductor (on a reel)
    Type HVI P LO 90 27 L100M SW
    Part No. 819 137
    Material of conductor Cu
    Material of insulation PE
    Material of sheath PE
    Color of conductor black ●
    RAL color similar to 9011
    Cross section of core 25 mm²
    Lightning current carrying capability (class / Iimp) H2 / 200 kA
    Equivalent separation distance s (in air) ≤ 90 cm
    Diameter Ø conductor 27 mm
    Characteristics of sheath UV stabilised and weather resistant
    Minimum order length 6 m
    Maximum order length 35 m
    Standard DIN IEC/TS 62561-8 (VDE V 0185-561-8)
    Weight 854 g/m
    GTIN 4013364152625
    PU 100 m

Downloads for 819 137

HVI P LO 90 27 L100M SW
HVI®power long Conductor (on a reel)

HVI®power long Conductor (cut to length)

HVI P LO 90 27 L6...35M SW

819 163 & 819 161

Cut-to-length HVI power long Conductor for on-site assembly. The conductor is delivered as a coil (Part No. 819 163) or on a reel (Part No. 819 161). Conductor length to be indicated when ordering (in steps of 0.5 m).

  • Technical specifications (819 163 & 819 161)
    HVI®power long Conductor (cut to length)
    Type HVI P LO 90 27 L6...35M SW HVI P LO 90 27 L6...35M SW
    Part No. 819 163 819 161
    Material of conductor Cu Cu
    Material of insulation PE PE
    Material of sheath PE PE
    Color of conductor black ● black ●
    RAL color similar to 9011 similar to 9011
    Cross section of core 25 mm² 25 mm²
    Lightning current carrying capability (class / Iimp) H2 / 200 kA H2 / 200 kA
    Equivalent separation distance s (in air) ≤ 90 cm ≤ 90 cm
    Diameter Ø conductor 27 mm 27 mm
    Characteristics of sheath UV stabilised and weather resistant UV stabilised and weather resistant
    Minimum order length 6 m 36 m
    Maximum order length 35 m 80 m
    Standard DIN IEC/TS 62561-8 (VDE V 0185-561-8) DIN IEC/TS 62561-8 (VDE V 0185-561-8)
    Weight 4,36 kg 25,97 kg
    GTIN 4013364280199 4013364281646
    PU 1 pc(s) 1 pc(s)

Downloads for 819 163 & 819 161

HVI P LO 90 27 L36...80M SW
HVI®power long Conductor (cut to length)

Contact

Have you got any questions? Contact us.

DEHN Inc.

Phone: 877-927-6510

back to top

Cookie Settings

We use cookies so that we can offer you the best possible website experience. This includes cookies which are necessary for the operation of the website and to manage our corporate commercial objectives, as well as other cookies which are used solely for anonymous statistical purposes, for more comfortable website settings, or for the display of personalised content. You are free to decide which categories you would like to permit. Please note that depending on the settings you choose, the full functionality of the website may no longer be available. Further information can be found in our Privacy Policy.
If you have given your consent for us to set cookies, you can revoke it at any time by clicking on the “Change Cookie Setting” link in the footer of the page.

  • Show details Hide details
    Necessary

    These cookies are necessary to run the core functionalities of this website, e.g. security related functions. With these cookies we can also detect if you want to stay logged into your profile to provide you with fast access to our services after revisiting our website.

    Statistics & Marketing

    In order to continuously improve our website, we anonymously track data for statistical and analytical purposes. With these cookies we can , for example, track the number of visits or the impact of specific pages of our web presence and therefore optimize our content.